VISU Pro Fume cupboard enables the safe processing of harmful materials and gases.
- Easy to modify – Countless uses and almost unlimited customizability.
- High quality – Materials for professional use and finished design, almost maintenance-free.
- Ergonomic – Clear and optimal design of details, electronic height adjustment if necessary.
- Space saving – The largest interior volume of the collection in relation to the external dimensions.
- Safe – The air suction is on the full width of the fume cupboard on upper and lower edge of the inner back wall.
- Ecological – Designed and manufactured responsibly in Finland, made to last for decades.
VISU fume cupboards are always equipped according to the customer´s needs. Feel free to contact us and we will design suitable solutions together!
|Dimensions and materials|
|Standard widths||900, 1200, 1500 and 1800 mm|
|Worktop depth||600 and 800 mm|
|Total depth||Single sash 730 and 930 mm, two-part sash 750 and 950 mm.|
|Total height||Single sash 2680 mm (possible to be limited),two-part sash 2350 mm.|
|Worktop height adjustment||Fixed 450 mm, manual 750–900 mm, electrical adjustment 750–1000 mm.|
|Worktop material||Acidproof steel, ceramic, polypropylene.|
|Side wall materials||Powder coated aluminum, compact laminate, clear polycarbonate, laminated glass, polypropylene.|
|Back wall materials||Powder coated aluminum, polypropylene.|
|Front wall||Vertical or inclined laminated glass.|
|Frame||Powder coated steel.|
|Ductwork||High-pressure laminate + back wall material.|
|Standards||On request according to EN 14175-2 : 2003 fume cupboards, with the exception of individual customer-specific requirements.|
|According to the order|
|Internal storage||4 pcs of back-wall rods made of acid-proof steel (Reservation for the back-wall rods is included automatically). Perforated shelves made of acid-proof steel, available also with height adjustment.|
|Sockets||IP21 or IP44, according to order, 4 pcs as standard, emergency stop.|
|Air flow control||0-1 control switch with indicator light, reservation for automatic air flow control.|
|The most common equipment||Sinks, taps, under-desk storage, under-desk safety cabinets, a knee-recess, a residual current circuit breaker.|
|Other additional properties||For example: EX-protection, ESD-classification, a hotplate, HEPA filter, hand-hatches, pass-through hatches, accessories in side panels. Ask more from our experts.|
Additional technical information
The technical properties depend on the fume cupboard width.
|Standard widths, [mm]||900||1200||1500||1800||Other dimensions are also possible.|
|Internal work area widths, [mm]||828-834||1128-1134||1428-1434||1728-1734||Depending on side materials.|
|Air volume, [l/s]||125||170||215||260||The sash 300 mm open, 0,5 m/s inflow.|
|Standard lights, led W (lumen)||10(1014)||15(1425)||19(2028)||19(2028)|
|Ventilation connection, [mm]||200||200||250||2×200 (cc 900 mm)|
Brochures and files
VISU Pro fume cupboard – EN
Selection of suitable fume cupboard
See the table below to select different properties. We always equip the fume cupboards according to customers’ needs. Feel free to contact us, and we will design suitable solutions together!
VISU vetokaapin valintataulukko
Delivery and installation
Fume cupboards are delivered, if so agreed, installed in place, ready to be connected to building services systems. A fume cupboard must be connected to a separate exhaust air duct. The water supply, drainage, gas and electricity work must be performed by professionals. An automatic air flow alarm and control system can also be included in the delivery.